The cooler cabin is made of 60 mm XPS sandwich elements for extra high insulation and comes with a refrigeration system that can cool down to minus 20 degrees. The doors use stainless steel bar locks and hinges, which are welded on a stainless steel frame that covers the entire door opening. The cabin has a load capacity of 1850 kg and a capacity of 6 EUR pallets.
The floor and walls are coated with aluminium plates so that you can place heavy objects and use a pallet lift without risk of harming the inside of the cabin. Anchor tracks are fitted to the walls to stabilise the content during transport. Tracks can also be installed for a cooler curtain, to further minimise cold temperature loss.
The cooler cabin is used in several industries, such as the fishing, food and event industry for storing and transporting fresh food and drinks. It has an extra sturdy chassis with suspension, which makes it suitable for fast transport even with a load capacity of nearly 2 tonnes.
The cabin connects to a standard tow bar and can be set up and ready in minutes. This allows you to move the cabin from one place to another, quickly and efficiently and without any hassle. The cabin is made from cleaning-friendly and durable materials, saving you time on cleaning and maintenance.
External: 3920 x 1850 x 2600 mm
Internal: 3796 x 1726 x 2000 mm
Own weight: 950 kg
Payload: 1850 kg
Capacity: 6 EUR paller
Refrigeration system - Cibin Alaske 240 OBN
60 mm XPS insulation
6 anchor tracks
1 side bar (placed on ancher tracks)
Aluminium plate on floor
117 mm aluminium plate up along the wall
Rubber packaging along doors
Stainless steel locks and hinges
Heat in door frame (optional)
230 V / 16 A CEE inlet
LED light strip
Electrical circuit panel
We cut all the outer walls with a seam and fit them so that the angle seals closely around the floor. We also cut the corners with a seam and assemble them with sturdy anodized aluminium profiles. This results in a cabin with maximum strength and density, and ensures you get the highest quality.
All our units come with a solid-cast roof. This ensures your cabin is weatherproof in all conditions and it also significantly increases its lifetime. The roof is cast with an even bend for optimal strength and water drainage. The roof also has a gutter system, which helps direct water and dirt away from doors and windows.
We only allow the highest standards for corrosion protection. All our cabins come with a sturdy heat-galvanised chassis. Galvanisation is only done once the chassis has been mechanically processed, so that all the edges and boltholes have also been galvanised.
Scanvogn A/S, Hovedvejen 50, 9850 Hirtshals, Danmark
CVR: DK 33 95 83 58 | Tel: +45 98 97 72 00 | Email: info[at]scanvogn.dk
CVR: DK 33 95 83 58
Tel: +45 98 97 72 00